Armco Vehicle Impact Protection
Vehicle Impact Barrier
This adaptable steel barrier system can be installed in either single or double height rows. The barrier system can be assembled in unbroken lines; can be terminated for access points and of course go around internal or external corners.
The steel barrier can be assembled on a choice of upright posts, either bolt down or foundation to be set into concrete. The bolt down ‘I’ posts have a heavy duty base plate and are secured with 4 x 20/120mm sleeve anchor bolts. The offset base plate design of the bolt down post gives a clean and unobstructed front face - an important safety feature.
The foundation posts are a simple straight ‘Z’ section with a planting depth of 500mm. Both systems can take either signal or double rails.
Click on Images to Enlarge
- Standard heavy duty barrier 300mm in depth
- Section length 2500mm
- 900mm approx in height
- Can be potted or surface mounted
- Actual sizes will be determined by site survey
Plastic Fishtail End
Fits all standard Armco terminals in all industrial environments. Moulded from flexible polymer in Black, yellow and grey. To add an extra level of safety there are 3 x 3M hi viz reflectors on each end.
Armco Accessories Range
Our Armco range of polymer and rubber accessories promotes high visibility to HGV/LGV drivers and forklift operators.
- Pedestrian safe
- Vibrant colour options
- Flexible/Absorbing on impact
- Diamond grade reflectors promoting safety
- Designed to replace and/or retrofit steel end terminals and corners
- Low cost and lightweight